The Flowing Bird Temple is a feeder for small Birds :-)
I printed this in PLA 0.2mm resolution and 0.4mm nozzle. The roof.stl is printed with support material generated by Cura. After that I Super Glued the parts together. See the pictures to see how the parts will fit together. I first glued the “base” parts. Then the “roof” & “wedge” parts. I also glued the M4x45mm bolt in place already, because later on (when all parts are together) it will be very difficult to do this. As last step I glued the “roof” , “base” and all the white parts together.
To make this model you at least need:
1X M4x45mm bolt and nut
2X mount pin.stl
1X mount ring.stl
1X mount wedge.stl
6X pillar 2L.stl
6X pillar 2R.stl
If you have any questions, feel free to ask :-)
Do you think I forgot something or made a mistake? Feel free to comment :-)
PS: the opening in the middle of the “base” is intensional. It's for letting the rain water out
Printers: Customs & Anets
Design Programs: 123D Design, Inkscape, MeshMixer
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!