I present 4 different shelves
The 4 shelves fit easily together.
They are all with hooks or no hangers so that you choose the meaning you want them to put on.
They can also be used as a decoration on a table or on a piece of furniture if you do not want to hang them on the walls.
They all have the same dimensions: 13.5 cm in length 18 cm in width and 4 cm in depth
All the shelves shown on the pictures were created in PLA
The 1 eme in yellow
The 2 eme in translucent red
The 3 emé in blue pallet
The 4th in color marble
The files are in STL from the first in yellow to the last in marble with hook then without hang
40% filling rate
60% printing speed
215 ° printing temperature
60 ° plate temperature (not required with PLA)
Layer thickness 0.2
Shell thickness 0.8
je modélise depuis janvier 2017, c'est devenu ma passion...
chaque objet est modélisé, imprimé et s'il y a un défaut il est corrigé avant d'être partagé...
bonne impression... : .la créativité c'est l'art d'accomplir ces rëves
I model since January 2017, it became my passion ...
each object is modeled, printed and if there is a defect it is corrected before being shared ...
good impression ...: creativity is the art of accomplishing these dreams