Spice rack rotary spice rack

Hi! This is an idea I had for a spice rack and I wanted to bring it to life.

This model consists of 3 parts: circular base, square base(x2) and the distribution for the boats(x4).

It has a capacity of 16 spice cans and takes up very little space and can turn on itself thanks to the incorporation of a bearing (22mm standard...my old in-line skates are starting to be useful XD). It is resistant and it can be printed in a relatively short time and in a simple way because it does not have supports and it fits everything being very compact.

Note: You can put boats up to 45mm in diameter, I have them of various brands and it goes well.

Total dimensions of the set 180x180x230

I hope you like it and find it useful.

(Nozzle 0.4)

PLA T°210 BED 80-60

Circular base: Layer height 0.2, V print 80, V movement 150, Filler 20% (reinforcement in the center where the bearing goes 80%) Time 3h

Square base: similar to the circular base. Time 6h

Distribution:(X4 at a time) Layer height 0.3, V 90-150, filling 15% time 10h