Spaghettiometer / Spaghettometer
- 1.2k views
- 2 likes
- 9 downloads
3D model description
It is a spaghetti meter that can also be used to close the bag of spaghetti. It works by depositing spaghetti on the center bars, each mark on the piece means 100 grams of pasta, which is the average amount of a serving for one person. In the photos is explained graphically. It can measure up to 500 gr.
The side bars are closed with circular neodymium magnets (6 mm in diameter and 3 mm in height), so that they do not disturb when the spaghettiometer is closed.
The file is printed without support so that the joints are in good condition.
It may be necessary to scale the stl file to 1000% cure.
3D printing settings
Layer height: 0.2 mm
Wall Thickness: 0.8 mm
Top / bottom thickness: 0.8 mm
Filled density: 30%
Print speed: 40 mm / s (Anet A8)
It has to be printed without support
- 3D file format: STL
- Publication date: 2018/03/31 at 09:34
Page translated by automatic translation. See the original version.
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!