Ender 3 Xmas House LCD cover

Small wood house with snow on the roof (and some tracks on it ;)) that you can use as an LCD cover for decoration or just to shade the glow

More photos:
https://www.instagram.com/p/CXn5I0hN1jm/
and
https://www.instagram.com/p/CXn53mbteN5/

Additionally there is an xmas tree shaped knob with a star on top

House is cut with 22,5 angle as LCD metal frame and will fit it's hole - there is a model without a cut so you can cut it for different printers lcds if it is with the same proportions
The base is 78x48mm. The frame hole should have around 80x52mm - if it is slightly smaller than the house you can resize the model (calculate by 78x48 as 100%, not the size

It is printed in two parts
You can use the base alone if you want

IMPORTANT
The model is highier than top of the bed
If you have original extruder case (with the hotend not motor) you can't print at least up to 2cm on the right because extruder will collide with the house
With moddified extruder (for example with bigger fans on sides) it will need even more space so remember this

Made in Blender 3D
Printed on Creality Ender 3

More Christmas decorations

Xmas 2021 Spiked baubles - FREE
https://cults3d.com/en/3d-model/home/xmas-2021-bauble-spikes

Xmas 2021 FREE Baubles Set
https://cults3d.com/en/3d-model/home/xmas-2021-free-baubles-set

Death Star Box / Bauble / Keyring - FREE
https://cults3d.com/en/3d-model/gadget/death-star-bauble-box-keyring

Tealight Covers Set
https://cults3d.com/en/3d-model/home/candle-tealight-covers-set

Tree Ornaments / Earrings Set
https://cults3d.com/en/3d-model/home/christmass-tree-ornaments-earrings

2019 baubles - FREE
https://cults3d.com/en/3d-model/home/christmas-balls-c47
and
https://cults3d.com/en/3d-model/home/christmas-tree-ball-decorative

Star for top of xmas tree - FREE
https://cults3d.com/en/3d-model/home/christmas-tree-star-c47

Cookie cutters:

LEGO minifigure - FREE
https://cults3d.com/en/3d-model/home/lego-minifigure-cookie-cutters

Piggy and friends - with free samples
https://cults3d.com/en/3d-model/home/piggy-and-friends-cookie-cutters

Flower - FREE
https://cults3d.com/en/3d-model/home/flower-cookie-cutter-c47

Suzanne (Blender's 'Monkey') - FREE
https://cults3d.com/en/3d-model/home/suzanne-blender-s-monkey-cookie-cutter

Roof will need supports (unless you will print 'roof_no-supp' but it may look little different when put on lcd)
You can use the 'supp-roof' file and set it to 'print as supports'. Supports should be in the exact same possition as the roof
Sometimes in Cura the roof or the supports models may be rotated by 180dgr. Remember that the hole in supports should be under the chimney hole

Models printed with 0.2mm layer hight but it is reccomended to print with better quality
House printed with 3 walls
10% infill (used just on some parts on the roof)

Tree knob with 2 walls (but you can use 3 for more strenght) - it may be better to print it with PETg
No infill
Changed the color near the top for golden star