Dryer Idler Pulley UPGRADE with bearings
- 686 views
- 1 like
- 1 download
3D model description
we are constantly replacing our Dryer Idler pulley due to the fact that the shaft is in constant contact with the non lubricating bushing. Dust, dirt and belt misaligned will bind the idler pulley and jam it up then causing the belt to slip around the pulley, the excessive heat will "burn" and pop the plastic away from the bushing causing the safety switch to trip and now it needs to be fixed.
I designed this new Idler pulley ( PETG ) to accept 2 bearings 1/2" ID x 1-1/8 OD X 5/16" press-fit from each side and then slide back on the shaft. the files also include the plastic triangle if yours is broken.. What i did is remove the shaft section with 1 bolt and i drilled a small hole in the end to place a cotter pin in place.
Replacement Idler pulley-$17.95
Bearings- $16.95 for 10 Pcs
3D printing settings
Filament PETG ( Nozzle 250 / Bed 70 ) your settings per your PETG might be a bit different than mine.
- 3D file format: STL
- 3D model size: X 54 × Y 54 × Z 17.1 mm
- Last update: 2021/03/15 at 12:45
- Publication date: 2020/09/16 at 03:10
- dryer idler pulley
- magic chef
- modern maid
- caloric & ikea
Designer and Manufacturing background and now making things that help around the house to make things easier.
Consider a small donation if you like the model and it fits your needs :)
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!