This is a simple drawer pull handle, but it is designed to be mounted in the same manner as power strips and other devices where the unit pushes onto a screw and then slides over (or down) to lock it into place. This is sized for use with standard wood screws.
A good trick for lining the screws up is to lay a sheet of paper over the base of the handle, and using the side of a pencil, rub the entire area of the paper covering the handle - similar to the way you would make a tombstone rubbing. This will leave the imprint of the mounting holes on the paper. You can then use that as a template to mount the two screws so that each one lines up with the smaller end of the opening. If you line the screws up with the larger end instead, when you mount the handle and slide it in to place, it will be over about an inch or so from where you actually wanted it. Don't thread the screws all the way in, obviously. You will have to find the proper depth by trial and error. Snug each screw down slightly, test fitting the handle each time. You want the handle to slide into place, but not so easily that it will just slide right back off.
I am a self-proclaimed know-it-all. I will tackle any project regardless of my experience, or lack thereof. Always ready to learn something new. With over 25+ years experience in electronic repair and 10+ years experience in small engine / ATV / motorcycle repair, there is nothing I can't fix, modify or build.
Why a pepper? In case anyone is curious as to why there is a hot pepper embossed into most of my designs... My nickname is Pepper and that little pepper logo is a hell of a lot shorter than "Copyright © 2017 by Derek J.G. Tombrello" which is how I usually sign my work :)
In addition to PayPal.me donate using bitcoin via my address: 1DdWx5E86iQsVam361q3T4qMGKXdGBRCxx --or-- dogecoin at: DEKT6CjdR3uAKQjmiGteTAg8gvKphY9tw5
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!