Skip to content

drain for sink - ralo para pia

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description


My kitchen sink used to get clogged up quite easily with leftover food. Always had to remove the remains so that the accumulated water could drain. However, when the dishes piled up, this task was a little more difficult.

This drain solved the problem. Its hexagonal holes prevent the rounded shapes from sealing it. Bottom channels allow water to drain to the very last portion, and the bottom inner cylinder helps keep it in place and improves strength.

It can be cleaned with a simple brush and was tested for over 10 months before being published here. At this time, the sink only filled twice due to plastic packaging that had been left there.


Minha pia da cozinha costumava entupir com bastante facilidade com restos de comida. Sempre tinha que retirar os restos para que a água acumulada pudesse escoar. No entanto, quando a louça se acumulava, esta tarefa era um pouco mais difícil.

Este ralo resolveu o problema. Seus orifícios hexagonais impedem que as formas arredondadas o vedem. Canais inferiores permitem que a água escoe até a última porção, e o cilindro interno inferior o ajuda a se manter no lugar, além de melhorar a resistência.

Pode ser limpo com uma simples escova e foi testado por mais de 10 meses antes de ser publicado aqui. Neste tempo, a pia só encheu duas vezes devido a embalagens plásticas que haviam sido deixadas lá.

3D printing settings

Layer: 0.2 mm
Perimeter/shell: 3
Infill: 26% triangle
no support

3D printer file information


CC BY-NC-SA - Attribution - Non commercial - Share alike



Issue with this design? Report a problem.

Best 3D printer files of the Home category

Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!