Double Spinning Strand Santa Holiday Christmas Ornament!

#CHRISTMASXCULTS

Santa suspended in a strand web within two spinning axes!

This can be printed in single color using the STL file, or printed in four-color using the 3MF file!

3MF painted multi-color model provided by creator 'OnTheRoad3DPrinting'. Thanks my friend!

#CHRISTMASXCULTS

I designed this to be printed using a 0.4mm nozzle and at a 0.2mm layer height.

If scaled down, the tolerances in the spinning pivots may not print well and might stick together. If scaled up, it will print, but those gaps in the spinner pivots may become a little too large.

NOTE: NO Supports are needed except for the small ring at the very top. It would be wise to put a small manual support under that portion since the ring itself doesn’t reach all the way down to the build plate.