Sakura" wipes dispenser
- 804 views
- 0 likes
- 0 downloads
- 0 comments
- 0 makes
3D model description
Here's a dispenser for your handmade wipes (+/- 8cm x 8cm).
You can store between 16 and 20 depending on the thickness.
Thanks to two elastic bands, the platform inside pushes the wipes upwards so that even the last of the box is accessible.
To open the box, slightly unclip the two side clips and lift the lid vertically.
3D printing settings
In addition to the parts to be printed, you will need
- 2 elastic bands (diameter about 4cm and width about 3mm)
Box size 125mm* x 65mm x 110mm (135mm with fasteners)
With the exception of the cover, all other parts are printed without support.
Layer height between 0.15 and 0.2.
Filling at your convenience, 15 or 20% is enough.
The "Sakura" pattern is simply stuck in the hollows on the front of the box.
See the picture with the pieces for the arrangement of the "Sakura" elements.
3D printer file information
- Design number: 267999
3D design format: STL Folder details Close
- Publication date: 2021-01-20 at 13:24
Best sellers of the category Bathroom
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.
AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.
DONATE: If you want, you can make a donation via Ko-Fi 💜.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Add a comment