Skip to content

smart base -gouge_01-

3D model description

gouge_01 is a display base that can be placed accessories, watches, bits and bobs.(It depends on the kind of watch and accessories.)

Easy Kimekomi by outputting a 3D printer!
(semi cover Kimekomi Body)

3D printing settings

It has become a model of support basically unnecessary.

It has become a model that assumes the output at a 3d printer fdm method.

There is a case where the output can be difficult depending on the type of slicer and 3d printer.

The output product by direct, indirect damages can not be held responsible in any case.

Image of 1-2 piece is in condition to have a Kimekomi.(sample Thick0.32)

Accessories in the image is not attached.

Please refer to this http://3dpblog.studiorevent.com/?eid=2 material, tool, work in regard to the steps required Kimekomi.

sample Parameters(Material_PLA)
Layer Thickness_0.32mm
Skin Thickness_1mm
Infill_16.7%
Support_none

About size 80x77x34 mm

  • 3D model format: STL

Creator

Followers 12 Following 2
Downloaded 759
Sales $2

I have been creating works using a 3D printer.
I have created a work that combines Kimekomi method which is used in the traditional crafts of Japan.
http://studiorevent.com

License

CC BY NC

Similar 3D files


Add a comment