Skip to content

Essential oil diffuser or perfume or lemongrass anti-mosquito V3

3D model description

It is a fan to diffuse essential oils or perfume and possibly lemongrass or other insect repellent products. The system is mobile, because it is wireless to take it anywhere in the house. It works with two batteries type 3v 18650 and a 3v -12 v motor To avoid printing galleys with supports I designed the parts so that they are printed flat and then assembled without glue or screws, just with a hollow screw. You will also need a toggle switch and a double battery holder box (see links), there are holes and grooves to pass the wires through the base of the diffuser, for the motor you need a motor of 3-12v Ø 27mm length less than or equal to 38mm, the shaft is about 2.4mm by 5mm (You can easily adapt different diameters of motor shafts by drilling or calculating with glue or hot melt.

Here are the links for the parts (For example):

The engine: https://www.amazon.fr/x27mm-3V-12V-20000RPM-moteur-Massager/dp/B01F0SZUP6/ref+12V+diameter+27&qid=1559117277277&s=gateway&sr=8-9

The battery holder: https://www.amazon.fr/Chargeurs-Rechargeable-PowerFul-LOT-Rangement-Bricolage/dp/B07D3S7XK1/ref

The M/A button: https://www.amazon.fr/Sodial-interrupteurs-bascule-noirs-Marche/dp/B00HUHBP8C/ref

PS this version features the new propeller much quieter and more efficient... Do not put too thick cotton, the purpose is to let air pass through the cotton fibers.

3D printing settings

Print in PLA, 15% or 20% ,Temperature 210°, if you have a heating bed set it to 60°.I use a prusa MK3S with SLIC3R PRUSA, when you have downloaded the STL, click on split and then arrange to find all the parts on the bed.

  • 3D model format: STL

Tags

Creator

Designs 8
Downloads 6
Sales US$4
Followers

Copyright

©

Page translated by automatic translation. See the original version.

Best sellers of the category Home

Related contents


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!