flower vase, glass, spout, flower pot, pencil pot, you can use it for whatever you want, with PLA if you follow the following print setting, you will have a useful, waterproof and flexible object , very fast to print (according to the size)!
I give you .zip file with: .stl / .gcode / .3mf /
. PLA 1.75mm
. Extruder: 210°C | Hot bed: 60°C
. Cura Profil: "Fine 0.13125mm"
. Layer Height: 0.13125mm
. Wall Thinckness: 1mm | Wall Line Count: 1
. Speed: 50mm/s
. Enable Print Cooling: Yes
. Build Plate Adhesion Type: Raft
. Remove All Holes: Yes
. Spiralize Outer Contour: Yes
. Smooth Spiralized Contours: Yes
. Printing Time: 48min