Cute Cactus Home Decor - Print in Place

The cutest cactus has arrived! And there are four different ones!
They are the perfect decor for your home or office. The best part is you can't kill them!
Be creative! Print them in all kinds of colors

Please tag me on Instagram or TikTok (@Holoprops); I would be thrilled to see your prints!

The pot is 6cm in height (2.36 in), and the giant cactus is 17.5cm in height (6.89in).
When combined into the final product, the pot and the biggest cactus are 19cm in height (7.48in)

⭐⭐⭐⭐⭐
IMPORTANT NOTE:
If you want to sell 3D prints based on my designs legally, please become a supporter on the platform of your liking:
🔵Thangs - www.thangs.com/designer/Holoprops
🟠Patreon - www.patreon.com/holoprops

All my Designs are covered by a Creative Commons Non-Commercial License on Cults 3D. The sale of prints using my designs is the sole right of myself, the designer, and my active supporters to do so. Please understand every design is many days of work and multiple prototype prints to ensure quality.

Happy printing!

All parts are print-in-place ready, no support is needed.
No glue! Just print and screw the cactus into the pot.

To get the best out of the STL file, please follow these guidelines:
• Layer Height 0.2mm
• Nozzle 0.4mm
• Recommended infill 20%.
• Do not print over 50 mm/s. A lower speed like 40 or even 30 mm/s will always produce better results.
• Make sure your bed is correctly levelled. Then check again :D
• Try to hide the seam and place it where nobody will pay attention.
• Make sure your printing temperature and bed temperature is adequate for the filament you are about to use.

Happy printing!

HOLOPROPS