This is a fairly simple furniture riser I designed for my Chesterfield.
The size is customize able with
- Top/Bottom size and height
- Radius for top/bottom
- Circular indentation, since my feet had built-in circular plastic "pads", set height to 0 if you don't need these
- Lip at the top edge, set height to 0 if not needed
- Radius at bottom edge z-axis, you might want more if you have a soft carpet or less if you have a hard floor
I printed PLA with 6x0.2mm top layers and 30% Triangular infill. Based on some tests I've seen online I'd estimate each one can support nearly 1,000kg (10,000kN) . I figure max actual weight is probably < 400kg spread between 4 legs, however we also need to account for the force of someone sitting heavily. So far so good.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!