Coaster: 'helping hands v2'

I have printed this model in multi-color, with a single extruder. It is also possible to print this model with one color!

This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:

https://www.thingiverse.com/thing:3130397

You can also have a look at my personal website:

https://www.raimoncoding.nl/

         -or-

https://www.raimoncoding.com/

Made with love by:

Raimon of IdeaLab

I have printed this model in Fillamentum electric grey PLA and Octofiber purple PLA. I have used 0.25mm layer height and 18% infill. I have used a heated bed at 55 degrees Celsius and my nozzle size is 0.4mm and was heated at 210 degrees Celsius. I have used a brim to ensure adhesion to the build plate. I have used the movement setting: 'combing not in skin' (Cura) for a smoother topsurface. I paused the print at the point when the helping hands drawing begins, changed filament, and resumed the print. Don't worry to use your own settings while this isn't a difficult model.