Skip to content

Charge Station for up to 5 mobile devices using RAVpower 60W charger

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

A charge station that will help keep things tidy when charging multiple mobile devices. It can hold up to 5 devices and there is an option to allow a fitness watch/band charge clip (only tested with Fitbit Ace) There are small and large partitions to allow for either phone or tablet.

It is designed to the take a RAVpower 60-Watt charger (102 x 70 x 30 mm) normally available from Amazon. It also needs 10pcs of M3 screws 8 - 10 mm in length with M3 nuts.

Prints without supports. Partitions with the pocket for a fitbit clip need to be printed vertically.

The pocket that holds the Fitbit clip was originally made for a Fitbit Ace but I have included a file for a larger pocket that should take a Fitbit Charge2 clip (20-22 mm wide)

If charging a tablet, print one of the larger partitions for the tablet to lean against and if the tablet is large, you may want to leave out one of the partitions.

  • 3D file format: STL
  • Last update: 2019/06/11 at 20:58
  • Publication date: 2019/01/30 at 10:04





Best sellers of the category Home

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!