Carl & Ellie's House - Pixar Up Movie night light - Big build

NOTE: PA1© - FOR FULL ACCESS TO ALL MY MODELS, + EXCLUSIVE STLs AND A COMMERCIAL LICENSE FOR SELLING YOUR PRINTS, YOU CAN JOIN MY PATREON HERE:

https://www.patreon.com/PA1_MAKER

Carl's house in the famous movie "UP" from Pixar.

Its a night light, with remote control (link for the led lamp provided in the files and in the description here.)

Approx Dimensions when completed: 200mm x 200mm x 280mm (with balloons)

Easy to print, only few parts need supports (pink and yellow towers).

All 130 files are zipped inside one folder. Instructions are in the other zip file.

-Divided in multiple easy steps with clear instructions. Almost
everything is glued except few parts.
-Parts are numbered individually with corresponding instructions.
-File names start with part number.
-File names are color coded, so you know wich color to use.
-Files are already placed in the right orientation.
-Dont pay attention to the rest of the name file, the first number and color are everything you need! ;)
-Refer to assembly pictures for quantity and position.

For the balloons, i have printed them at full size, and some others were scaled to 115% to have bigger ones...

Use filament pieces for the strings.

***FOLLOW the instructions for assembly. Altough it is quite simple, some steps are required before some others. So follow the instructions in pictures, and everything should be very easy.

The link for the led light on Aliexpress:
https://www.aliexpress.com/item/4000879534573.html

You have an allround tolerance of 0.3mm for inner parts. Everything should go well together if your printer is well calibrated.

You dont need supports for the stairs. If your bridging settings are well done, print them as is and it will be fine.

If you have any questions or remarks, you can email me at: padeslauriers@yahoo.com. I will try to answer you as quick as i can.

My settings:

0.2 layer height
210 temp. 205 small parts/details
60mm/s
Everthing is in PLA.