- 1k views
- 4 likes
- 32 downloads
3D model description
The 'Burger Stacker' is a fun, practical and colourful storage solution!
Use his design as a storage solution for your own needs or print as a fun, unique and novel gift. Make it as colourful as you like... be creative.
Files provided include the (bun) base and top as well as a broad range of layers. There are two different top files. One has dots to represent seeds, the other is plain. Other than that they are the same. Each layer has a different edge pattern to make them easier to grip and rotate plus, I addition to colour changes, set them apart from other layers
The layers can be custom configured to suit your storage needs... and can be added to as/when you need. Just print another layer or two and make your Burger Stacker and even taller stack!
Layer options include different diameters and shapes with varying tray depths as well as hollow (no base) layers. Details as follows:
Layer heights: Three sizes stated in mm (70mm / 75mm / 80mm)
Layer internal storage tray depths: Three depths provided S / M / L (6mm / 9.5mm / 13mm)
Layer Floors: Two different types... one has a floor in the layer (Type F) so the above depths apply. The other is simply a hollow tube layer (Type H) that acts as a spacer to increase the height and storage capacity of the layer/s below. These layers have no floor.
So, as an example, layer 75-M-F.stl is 75mm in diameter, the storage height is 9mm and it has a floor so is a stacker layer in its own right. However, layer 75-M-H is still 75mm in diameter, has the same overall height as the 'F' type but is hollow so has no floor in the layer. That allows the storage height of the below layer/s to be taller.
To assemble simply push one layer into another layer then turn clockwise to lock in / turn counter clockwise to unlock then pull apart (Same a s a usual right hand thread).
Please refer to the print settings / instructions and images for additional information... and post images of your Burger Stackers in use for others to see!
Note: If you like this check out the rest of my fun and practical designs.
- 3D file format: STL
- Publication date: 2019/07/05 at 15:58
- ham burger
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!