I made a Halloween decoration, arms coming out of the ground with hanging brackets
two sizes: small (for a playful decoration) and large (for a realistic decoration)
the small arms measure 5.2 cm wide 14.3 cm long and 7 mm thick, printing time 2 h14 min
the supports of the small arms measure 0.4 cm wide 8.9 cm long and 4 mm long
the square support measures 2.5 by 2.5 cm and 4mm thick, printing time 43 min (for both supports)
the large arms are 8.1 cm wide, 22.3 cm long and 10 mm thick, printing time 6 h 16 min (for both arms)
the supports of the large arms measure 0.7 cm wide 14 cm long and 5.3 mm long
the square support measures 3.9 by 3.9 cm and 8.8 mm thick, printing time 1h 57min (for both supports)
I wish you a nice Halloween decoration and happy birthday to all of you
filling rate 30% 30%.
printing speed 80 %.
pla 215 ° (on the natural photo pla)
thicknesses above and below 0.2
layer thicknesses 0.2
hull thicknesses 0.8
je modélise depuis janvier 2017, c'est devenu ma passion...
la créativité c'est l'art d'accomplir ces rêves
ma page facebook : https://www.facebook.com/catf3d/?modal=admin_todo_tour
instagram : https://www.instagram.com/catf3d/
twitter : https://twitter.com/catf3D
tumblr : https://catf3d.tumblr.com/
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!