Christmas flake balls (perfect sphere)
- 111 views
- 0 likes
- 0 downloads
3D model description
A real Christmas bauble to be printed, perfectly round, no flat, it's a whole technique to be followed in the parameters and assembly instructions.
In fact it's 2 half spheres that are glued together.
After printing, you have to glue the 2 spheres together and hang it, I use Ni clou ni vis, it works very well.
Put a little on the edge so that it spills over, and you wipe off the excess, it will fill in the remaining joint.
Then use a mastic/after undercoat to remove the traces of printing and the joint between the 2 spheres.
Repeat After and sand until all traces are removed.
Then you apply the paint you want.
3D printing settings
Wall thickness = 0.4mm otherwise it will be too heavy.
Filling = 0, same and there is no need for it.
Of course it will be fragile like a real one, so don't drop it.
- 3D file format: STL
- Publication date: 2020/11/23 at 14:53
3D in France est une micro entreprise qui espère grandir.
Dans le but de faire de sa passion un métier.
L'entreprise a pour objectif de favoriser le made in france, matière première uniquement française
Page translated by automatic translation. See the original version.
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!