Bottle storage attached to shelf holes Ø<65mm

This storage solution is for any kind of bottle like items. You can store your bottles on the wall of your cleaning cabinet.

This version is for bottles with a diameter / with smaller than 65mm.
For small bottles check this thing: http://www.thingiverse.com/thing:1806907
If it still not fit to your needs let me know.

It will fit to all cabinets with Ø5mm through holes with a pitch of 32mm.
If there are cabinets with different pitch let me know.

https://youtu.be/KwG_WhiQDeY

Printer Brand:
RepRap

Printer:
Prusa i3

Rafts:
No

Supports:
No

Resolution:
0.2mm

Infill:
20%

Post-Printing

Parts List
if you like to build your own bottle storage, you will need the following items.
2x steel tube Ø12mm (*)
4x screw M5 x 30mm
4x nut M5 (standard 0.8xd)
optional 4x M5 washer

(*) The length of the tube has to be according your cabinet