Skip to content

Proto Bong

?
Creation quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Stylish bong with Tri Pull Matrix produces a smoother hit.

Draws like a pencil, hits like a Bong!

Requires a 14mm bowl


3D printing settings

I used .25 layer height for all parts but of course you can print @ a higher resolution if you wish

Retraction settings:

  • Only retract when crossing open spaces
  • Minimum Travel for retraction 6mm
  • Perform retraction during wipe

I did not use 'Avoid crossing outline for travel movements' as this for some reason doesn't print as well especially along the start line/seam.

Select 'Choose start point closest to specific location' and rotate parts in your slicer until seam is down the back of the part(s)

I used supports only for the Connector.stl as there is an inside rim, you may have good results without supports with your printer, it's a small piece so I would try without supports first.

I find the bowl will leak eventually if it is not coated on the inside

To coat the bowl:

  • Varathane Diamond Wood Finish - Interior Water based poly - I think I paid $9.00 CDN

    • For Food Safe, BPA free, 0 VOC you can use a product called Art Resin it's a tad more expensive to purchase.

Assembly:

Sand with 300 grit sandpaper just to rough up the contact points and use non toxic glue, I used Weldbond Adhesive, 420-mL.

Sand the inside of the bowl as well before applying Coating

Tips: paypal.me/GamerDesk

3D printer file information

  • 3D design format: STL Folder details Close
    • Bowl.stl
    • Connector.stl
    • Mouth.stl
    • Stem.stl
    • TriPull.stl

    Learn more about the formats

  • Last update: 2018-12-15 at 20:04
  • Publication date: 2018-12-07 at 19:37

License

CC BY NC SA

Tags

Creator

Designs 2
Downloads 1.2k
Sales US$34.76
Followers 4
Issue with this design? Report a problem

Collection associated with this 3D model


Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!