Designed to add support for bird perches that use washers as there support. With only two bars to support the perch, it was leaning down at 30 degree angle from the weight of the bird. This support print brings it back to horizontal. You can pretty it up with the name of your bird. The slot in the middle of the print will help you align the letters so they can be glued. There is a round recess at the top that can be used to add a 3d printed coin for color. Sample was printed with Inland neutral and black PLA. The coin was printed with gold silk PLA. Both Simplify3d and Slic3R were used to slice. Printed on a Prusa i3 MK2.5.
No Support needed.
Alpha and numbers print upside down as there is a nub on the bottom for alignment.
Slicing tested in Simplify3D and Slic3R
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!