As my resolution for this year was to be closer to nature and more environmentally friendly I thought it would be perfect to design, print and use this bird feeder.
I would love it if you where to print this yourself (and so would birds to)
This is for the #XYZCHALLENGE
Notes for assembly:
Everything will slot together and you should put the pin through one of the slide bars, through the tube, through the bottom piece and then finally out the other end through the second slid bar.
I would recommend using some simple glue or double sided tape to make sure the slide bars stay in place.
After that all you have to do is slide a piece of string through the top hole of the tube, then through the holes on the lid, then back through to the other top hole in the tube with both ends of the string having a knot to keep it in place.
10% on all models except for the tube where it should be solid with 3 wall perimeters.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!