Skip to content

birdfeeder 3.0

3D model description

birdfeeder

3D printing settings

WE RECOMMEND GLUE ALL 3 PARTS TOGETHER!!!!!

We had realized that sun is causing in some causes disassembling

Top or Body from legs!!!!! We are sorry for that we are working on update! As option you can print body_whole.obj instead of that!

Anyway give us reports if we are lonely....

Recommended print setup for makerbot 2:

All parts are printing at:

layers resolution: 0.3 mm

shells: 2

infill: 10%.

nozzle: 0.4 mm

temperature: 210

supports: off, included in 3d model

Antlers:

print speed: 90 mm/s

travel speed: 150 mm/s

rafting: we

Top:

print speed: 120 mm/s

travel speed: 150 mm/s

rafting: off

Body:

print speed: 100 mm/s

travel speed: 150 mm/s

rafting: we

Legacy:

print speed: 120 mm/s

travel speed: 150 mm/s

rafting: off

Flat:

print speed: 110 mm/s

travel speed: 150 mm/s

rafting: off

Body_whole: You can print it at once (legs, body, top)

print speed: 100 mm/s

travel speed: 150 mm/s

rafting: off

You can tweak all setting as you like.

  • 3D model format: OBJ and STL

Tags

Creator

We are team of architects, designers and graphic artists who explore and develop possibilities of 3D printing technology as a way of developing a product which is constantly evolving and being perfected based on errors of previous prototypes, much as living organisms are.

http://www.printednest.com/

License

CC BY NC SA

Similar 3D files

Best sellers of the category Home


Add a comment