Furniture Caster Bedbug Traps
- 1.4k views
- 1 like
- 2 downloads
3D model description
It happens in the best of homes. These traps will catch the critters as they try to crawl up or down bed posts or other furniture legs.
You get all 3 sizes! - 3.1" round, 2" round, 2.5" x 3" rectangle. The size refers to the maximum size of the leg that will fit in the center. The overall dimensions are larger.
To use, fill the outer moat area with about 1/8 inch of diatomaceous earth or other bedbug powder. Then place as a caster under each furniture leg. The bugs will be trapped in the moat, and will be killed by the powder. Leave in place until no additional bugs are caught.
I was able to rid a bedroom of a fairly severe infestation by using these casters, as well as a fairly low cost fabric steamer, and application of the powder along baseboards and door thresholds. It will take a few weeks, until all eggs hatch, and then the powder does the rest.
3D printing settings
No supports, 1.2mm walls, 25% to 50% infill. (Use higher infill for use on soft carpets). .15 or higher layer height.
- 3D file format: STL
- Publication date: 2019/09/09 at 21:09
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!