UPDATED BOWL 08/28/2018
I updated the bowl to allow the Water Insert (dispenser) to lock together. This will make it easier to lift the waterer out of the brooder without having to hold both items together at the same time. Now you can fill the mason jar, lock the bowl in place, then invert the waterer as a whole, avoiding a mess. See: Chick Water Bowl_Revised.stl
We have some new chicks on the way, and I needed some quick feeders and waterers.
We happen to have a lot of Mason and Ball Canning jars lying around, so I thought I would put them to good use. I looked online for some commercial solutions, but didn't really find any that were drown resistant. So I designed this from the ground up.
Here is the Chicken watering device that is drown resistant. The Chicks can't plop in and fall asleep below the water level. It comes in 2 pieces. The insert that accepts any size standard mouth mason jars, and the water bowl it sets in. You can use 4 oz, Quart or Pint size jars. But for Cockerels and Pullets, it will also work fine. Clean and sanitize it with a mild bleach solution often.
I recommend a canning gasket inside the insert to make sure you have no air leaks that would cause the mason jar to empty over the threads. Mine did not need it, so if your's keeps dripping, then use a little silicone (let it dry) or use a small gasket.
Any size Standard Mouth Mason jar will do to complete this safety waterer.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!