Skip to content

Automatic Smart Plant Pot - (DIY, 3D Printed, Arduino, Self Watering, Project)

Download free 3D printing designs Automatic Smart Plant Pot - (DIY, 3D Printed, Arduino, Self Watering, Project), DIYMachines
Download free 3D printing designs Automatic Smart Plant Pot - (DIY, 3D Printed, Arduino, Self Watering, Project), DIYMachines

Did you 3D print this model?

3D model description

Sometimes when we go away from home for a few days or are really busy the house plants (unfairly) suffer because they are not watered when they need it. This is my solution.

All the electronics, pumps and water reservoir are contained inside the pot to keep it looking smart. Each pot (if you make more than one) can also be set to the needs of different types of plants.

It has an Arduino Nano controlling everything and the cost of the components has been kept as low as possible. Below are links to the parts on Amazon.

How to build it video: https://youtu.be/T_tpKoNCVYw

CORRECTION: 4:05 into the video I incorrectly say to use 20cm wires to connect the water level sensor. The correct length is 35cm.

==========

List of items used in this project and where to find them (the links are Amazon affiliate links and help support this channel at no cost to you):

■ Arduino Nano: https://geni.us/ArduinoNanoV3
■ Mini submersible pump: https://geni.us/MiniPump
■ 5mm tubing: https://geni.us/5mmTubing
■ Transistor: https://geni.us/2npn2222
■ Resistors (1k and 4.7k): https://geni.us/Ufa2s
■ Wire: https://geni.us/22AWGWire
■ 3mm LED: https://geni.us/LEDs
■ Water level sensor: https://geni.us/WaterLevelSensor
■ Nuts and Bolts: http://geni.us/NutsAndBolts
■ Soil moisture sensor: https://geni.us/MoistureSensor
■ Half Perma-proto board: https://geni.us/HalfPermaProto
■ PLA Filament: https://geni.us/PLAFilament

■ Battery powered glue gun: http://geni.us/BoschBatteryGlueGun
■ Battery powered soldering iron: http://bit.ly/SealeySDL6

==========

The code can be downloaded from here: https://github.com/DIY-Machines/SmartPlantV1

==========

SAY THANKS:

Buy me a coffee to say thanks: https://ko-fi.com/diymachines
Support me on Patreon: https://www.patreon.com/diymachines

SUBSCRIBE:
https://www.youtube.com/channel/UC3jc4X-kEq-dEDYhQ8QoYnQ?sub_confirmation=1

INSTAGRAM: https://www.instagram.com/diy_machines/?hl=en
FACEBOOK: https://www.facebook.com/diymachines/

Disclaimer:
This video is shared for demonstration purposes only.

3D printing settings

PLA
20% Infill
No supports required

  • 3D model format: STL

Tags

Creator

License

CC BY NC

Similar 3D files

Best sellers of the category Home

Related contents


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!