Fastener and weight for a slat blind

This attachment and weight will allow you to repair some of your vertical slat blinds.

Because of the sun, the original plastic has become brittle to the point where it has to be changed.

Dimension (in mm) :

• Attachment: 127 x 6 x 15.5

• Weight: 140 x 4.7 x 49

Slow printing is strongly recommended if you place these two elements vertically on your printing table. This will ensure that your objects are perpendicular to each other during printing.

Parameter on Simplify3D :

• Filling: 100% for both objects

• Accuracy: 0.2

• Addition:

*** Skirt layer: 10

*** Skirt offset: 0 mm

*** Contour: 10

• Support: 5-10%

• Printing speed: 40 mm/s (or 2400 mm/min)