Tired of the deposits at the bottom of your pool? Can't get the bottom of your pool sucked up Intex? a robot to suck up the bottom of your pool can be very excessive in terms of budget ...
So that's why I created 2 (different) sleeves easy to print is very efficient!
The 2 Printed Sleeves
2 O-rings identical to the ones on the connection of your pump's suction and discharge hoses
2 steel clamps
1 hose Ø32 identical to those of the filter cartridge pump
Once all this is put together, put the 2 O-rings on the printed sleeves (in the groove of each piece), and assemble the nozzle on the pipe only with a steel clamp.
Dismantle the grille at the suction side by removing it completely and then position the simple coupling in its place (the groove with the O-ring on the outside to connect the hose). I then strongly advise you to "run" the hose in order to remove the air inside before connecting it to the simple connector.
Once everything is assembled, all you have to do is to activate your pump and suck the deposits from the bottom of your pool (for my part, I enter the pool, it's easier).
As a result, you remove as much deposit as possible and you don't lose any water!
PET recommended 30% fill.
Spécialiste du sur - mesure et de la rétro conception. Modèles de qualité, tous conçu et testé !
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!