Here is the armillary Mount for smartphone.
Ideal to keep your phone for a pleasant use.
For phones with a maximum height of 162.5 mm and a drop of 78.5 mm.
Iphone SE, 6s, 6s+, 7, 7+, 8, 8+ and X.
Samsung Galaxy S7, A8, S8, Note 7 and 8.
Huawei P20, P2 pro, P20 lite, Mate 10 pro, Y5, Y6, Y7.
Designed to be placed on a desk, this stand has a hole for a Kodak type screw (UNC 1/4", 20 tpi).
Each piece is laid for a comfortable 3d impression.
We recommend the use of a layer height of 0.2 mm to maintain good accuracy.
Base; 1 part
Exterior Gear; 1 part
Interior Gear; 1 part
Shaft Roller; 4 parts
Exterior Roller; 2 parts
Interior Roller; 2 parts
Pinion; 4 parts
Shaft Pinion; 2 parts
Shaft Scroll; 2 shares
Interior Bar; 1 part
Interior Slide; 2 parts
Exterior Bar; 1 part
Exterior Slide; 2 parts
Rod 2 parts
Claw; 1 share
Claw Button; 1 part
inter-piece adjustments are calculated to obtain functions at each assembly.
here are detailed the different game expected, personally they were obtained by sanding (grain 200 and 400).
the diameters 12 mm receiving the shafts of the pinions must allow free rotation of the shaft.
they are drawn at a diameter of 12.1 mm for a shaft at 11.9 mm.
the 10 mm diameters receiving the shafts of the rollers must be tightened as they stiffen the base. they are drawn at 10.05 mm
for a 10 mm shaft.
The hole in the base of the base has a UNC thread 1/4 "20 tpi (screw kodak) for mounting on a camera tripod.
the diameter is drawn at 12 mm to tighten slightly on the shaft, the drive is ensured by the key.
they handle the game of gears. Those labeled outside, go down the base and inside at the top. Their inside diameter is drawn at 10.2 mm
to rotate freely on the shaft diameter 10 mm.
the diameter of the ends must rotate effortlessly on the gears. it is 7.9 mm for a diameter of 8 mm on the gears.
the center diameter measures 7 mm for one and 7.3 mm for the other to ensure a completely free movement.
the inner square measures 8.3 mm on one side and slides freely on the bars whose square section measures 7.9 mm.
Two of the slides receive a connecting rod on the diameter 12 mm.
their hole diameter 12.2 mm split rises on the diameter 12 of the slide.
the 5.1 x 15.5 mm rectangular slot fits on the 5 x 15 mm rectangle of the connecting rod.
The hole in the middle of the base is threaded in 1/4'UNC pitch (Kodak screw).
Extruder: 200 ° C and bed: 55 ° C
Layer height: 0.2 mm
Vertical shells, perimeter: 3
Horizontal shells, solid layer top: 3 and bottom: 3
Fill density: 30%
No support material
Speed perimeters: 45 mm / s
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!