Aquarius (Water-Bearer) Zodiac Tealight Cover

Zodiac Tealight Cover with AQUARIUS (Water-Bearer) Sign, symbol and simplified constellation

Now in version 1.2

• smoothed walls of base model
• now there is no holes in Symbols, it will print easier
• Symbols and Signs are changed a little. Looks better

Full set of all zodiac signs is here:
https://cults3d.com/en/3d-model/home/zodiac-tealight-cover

More sign models are in separate links on the bottom of this section

'Original' in the files names tells you that there is a romboidal holes pattern.
'Mix' is with sign, symbol ('picture') and constellation on one model

Here is some example prints from my instagram

• ver 1.2 , all models with rainbow filament
  https://www.instagram.com/p/Ce8s0OcNws5/

• Video with Capricornus with all sides in dark:
  https://www.instagram.com/p/CJ9CDJSLboE/

• Photos of Aquarius from all sides in light:
  https://www.instagram.com/p/CJ_ZjP5LhoX/

• Photos of Pisces from all sides in dark (with better flame than on video)
  https://www.instagram.com/p/CKCDRN-Logq/

• Video (on the end) with 1st layer set to concentric
  https://www.instagram.com/p/CKEECesrH6A/

Tested with tealight on PLA prints. No deformations were noticed (nor in walls nor in bottom) but there can be some if you will use bigger and fatter candles - be advised.
For more light use transparent filaments.

Models and renders made in Blender 3D
Printed with Pearl Gold PLA from Spectrum on Creality Ender 3 with 0.2mm layer hight
Ver 1.2 printed on JG Maker A1 with Rainbow PLA+ from Sunlu

Links to each sign (sorted by original name):
Aquarius (Water-bearer)
https://cults3d.com/en/3d-model/home/aquarius-water-bearer-tealight-cover

Aries (Ram)
https://cults3d.com/en/3d-model/home/aries-ram-tealight-cover

Cancer (Lobster / Crab)
https://cults3d.com/en/3d-model/home/cancer-crab-lobster-tealight-cover

Capricornus (Goat)
https://cults3d.com/en/3d-model/home/capricorn-goat-tealight-cover

Gemini (Twins)
https://cults3d.com/en/3d-model/home/gemini-twins-tealight-cover

Leo (Lion)
https://cults3d.com/en/3d-model/home/leo-lion-tealight-cover

Libra (Scales)
https://cults3d.com/en/3d-model/home/libra-scales-tealight-cover

Ophiuchus (Serpent-bearer) - FREE
https://cults3d.com/en/3d-model/home/ophiuchus-serpent-bearer-zodiac-tealight-cover-free

Pisces (Fishes)
https://cults3d.com/en/3d-model/home/pisces-fishes-tealight-cover

Sagittarius (Archer)
https://cults3d.com/en/3d-model/home/sagittarius-archer-tealight-cover

Scorpio (Scorpion)
https://cults3d.com/en/3d-model/home/scorpio-scorpion-tealight-cover

Taurus (Bull)
https://cults3d.com/en/3d-model/home/taurus-bull-tealight-cover

Virgo (Maiden)
https://cults3d.com/en/3d-model/home/virgo-virgin-tealight-cover

More Tealight covers:

• https://cults3d.com/en/design-collections/c47/tealight

First layer is best looking when set to 'concentric' pattern.

Set print to 3 walls, no infill needed.

No supports are needed but you may need little more cooling on some models.

It looks good with 0.2mm layer hight but as it is for decoration I reccomend to use a better resolution.

Models are made for 0.4mm nozzle.
It's a single wall width on light blue parts on renders, holes are white.
So always check your model in slicer in layer view. It should not happen (models were tested) but if you will have more holes in view than shown in models you will need to change line width to little smaller (like 0.39 instead of 0.4).