Skip to content

Antique Camera Display Base

3D model description

This is a simple 100mm x 100mm decorative base that accepts a standard 1/4" x 1/2" hex bolt as seen here:

https://www.homedepot.com/p/Everbilt-1-4-in-x-1-2-in-Stainless-Steel-Hex-Bolt-804186/204633242

Inset the bolt into the base and screw it into the tripod mount of your camera for a simple yet elegant display piece. Looks great in stained wood filament!

There is also a customizable SCAD version available in the ZIP file that can be adjusted for multiple sizes and uses in SCAD. The profile is slightly different, but the result is the same. The hole is also customizable so you can adjust the diameter if you want to use a different type of screw, such as a traditional tripod screw. There mounting hole is 4mm deep when measured form the top, so your bolt/screw needs to be long enough to clear that and hold your camera secure.

3D printing settings

Needs some supports for the hole, I used 4 perimeters so it's nice and strong.

  • 3D model format: STL and ZIP

Tags

Creator

License

CC BY NC

Similar 3D files

Best sellers of the category Home


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!