Amigo is an ultra-customizable stool, designed for small spaces where the number of people can vary quickly.
This stool can be set up or put away in two movements and can become a decorative element in its own right thanks to its wall hanging system.
You will need 2m of 25mm diameter round bar, which you will have to cut into 4. You will then have a seat height of 50cm, but you are free to change the length of the feet!
A 30 cm diameter tray for the seat, 15mm minimum thickness.
You will need to print:
1 foot wedge
1 double foot
2 symmetrical pivot feet
2 central pivot
1 central link
Thick enough walls are necessary, 1mm minimum and 25% minimum filling.
Everything depends on the quality and resistance of your wire!
Page translated by automatic translation. Suggest a better translation