Wall-mounted electrical outlet

I realized that some electrical outlets are never or rarely used. Converting an unused outlet into a wall hanger seemed like a good idea to me.

The hook slides inside the socket and holds by "sintering" while the hole allows the metal rod to hold the hook straight.

If the hook doesn't hold, or if it doesn't fit, you can play with the dimensions of the piece directly in your slicer.

Example:

The plug only partially fits

I reprint the part with a 95% homotheticity

You can use classic print settings with however :

• no support

• at least 20% filling (for strength)

• 3 walls (outside line) (for strength)

Approximate dimensions of the appropriate socket:

39 mm in diameter

15 mm depth