5 Kawaii Dumplings - Christmas Tree Ornaments

Print-in-place
No Support Needed
💙💙💙

This year, go Kawaii and make your Christmas Tree unique!
FIVE different Dumplings are included. Hanged them in the tree with your best decorative string.

Super easy to print! Great gift 🤍
Guarantee 100% cute & Kawaii! (✿◠‿◠)

Use a little point of super glue to assemble the elements of the faces. (I am using: BSI Insta-Cure+)

⭐⭐⭐⭐⭐
IMPORTANT NOTE:
If you want to sell 3D prints based on my designs legally, please become a supporter on the platform of your liking:
🔵Thangs - www.thangs.com/designer/Holoprops (http://www.thangs.com/designer/Holoprops)
🟠Patreon - www.patreon.com/holoprops

All my Designs are covered by a Creative Commons Non-Commercial License on Cults 3D. The sale of prints using my designs is the sole right of myself, the designer, and my active supporters to do so. Please understand every design is many days of work and multiple prototype prints to ensure quality.

Happy printing!

To get the best out of the STL file, please follow these guidelines:

• No support is needed for any parts. Everything is ready for printing.
• Layer Height 0.2mm
• Nozzle 0.4mm
• Recommended infill 15%.
• Recommended Infill Pattern: Gyroid or Cubic
• If you have difficulties printing the small elements of the face, use a Raft in your slicer; that will help.

• Prepare and clean your bed for excellent adhesion.
• Do not print over 50 mm/s. A lower speed, like 40 or even 30 mm/s will always produce better results.
• Make sure your bed is correctly leveled. Then check again :D
• Try to hide the seam and place it where nobody will pay attention.
• Make sure your printing temperatures and bed temperatures are adequate for the filament you are about to use.