These are fun, easy prints that take up just a tiny amount of filament. One of the cool features of a soft flexible like NinjaFlex (SH=85A) or Filaflex (SH = 82A) is that it sticks really well to windows and mirrors when printed at 1mm to 3mm thickness. It's important that your print surface and the windows you stick the decals on are clean ;) to insure smooth against smooth. Just wet with water and stick. I have some up in my office that have been there for almost a year. If you don't have any flexible filament you can buy some magnets at a craft store and turn these into refrigerator magnets. I started with images downloaded from pixabay.com from their public domain section and edited them for printing.
Lately I have been printing Ninjaflex from 235 to 250 and Filaflex from 235 to 240. Theses are actually a pretty good test print. If the flow is not good try to increase your temperature by a couple of degrees.
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.