Skip to content

The Heist - Puzzle Box REMIXED by LeisureLuke

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

All REMIXED parts end with _R. See this YouTube video to for more detail on the improvements:

Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much more fun! All the feedback has lead to MASSIVE improvements! Stronger, No more wear, less breaking, smoother, better, easier to use/store/ship and MORE!

The Spring improvements: All the springs that would be "stored" compressed now have the option of adding a rubber band, so it NEVER WEARS OUT! In The Heist there is a rubber band for the Diamond_T7, one for Barrel & LowerBoltClamp, and a final on the ClipSpring, which is tricky to install!

The Barrel improvements: The weakest point of the barrel is now much fatter, and the entire barrel diameter is larger.

Original Hilarious YouTube Homemade Commercial: (April 30, 2021)

Assembly Instructional Video:


The Heist - Puzzle Box is an original design by Leisure Luke. It's a 23 Piece Puzzle Box that is SUPER EASY TO PRINT! No Supports Needed. Print it in PLA! Parts without squiggly springs can be PETG or PLA. Very little plastic used!

0.1mm tolerance for all non-sliding parts.
0.2mm tolerance for sliding parts

Verified to Print well at 100% and 150% sizes (0.4mm nozzle, 0.2mm layer height)

My Colors for each .stl model
Gold - Gold
Tool - Gold
Diamond_T7 - Blue
Bolt - White
Barrel - White
BarrelSpring - White
BarrelPinV2 - White
HeistLid - Marble for 2 layers, Blue for 5 layers, Marble for remainder.
UpperBoltClamp - Marble
LowerBoltClamp - Marble
SafeBar - Marble
Spacer - Marble
Heist_Base_R - Black for 2 layers, Gold for 5 layers, Marble for the remainder
Dial - Red for 5 Layers, Black for the Remainder
VaultDoor - Black
Clips_Print_3_of_These - Black
ClipSpring - Black
Pins_2_and_3 - Red for 2 layers, Black for 5 layers, Red for the remainder
Pin_1 - Red for 2 layers, Black for 5 layers, Red for the remainder
DoorButton - Red for 2 layers, Black for 5 layers, Red for the remainder
PinClip - Red

You should be able to straight from the PRINT bed to ASSEMBLY! No External parts needed - no metal springs, no bearings, no magnets, no electronics, NO GLUE, NO SANDING... you get the idea!

As tested - 100% PLA 3D Printed!

Print all 20 pieces and 3 clips and they'll fit together pretty easily. Watch the YouTube video, I use a pliers for some parts of the assembly, especially at 100% size.

Again, see the YouTube Videos to get excited, for assembly, and if needed, to show the solve as well!

LATEST Puzzle Box from Leisure Luke Here:

Comment, Provide Feedback, I always want to improve these puzzles for the final larger project!

These are all modular pieces that will be a part of a larger project... that I rambled on about in Episode 1 :P Basically, each puzzle becomes a side of Puzzle box that I call - the 5 aces. After the 4th Puzzle Box I'll release the final pieces required to do the full "5 Aces" Assembly. I'll also be printing and sending that puzzle box to a few youtubers to solve, and possibly selling a fully-assembled version on Etsy (if people are interested). Thanks for all the likes and feedback! I need more feedback always!

I'd love a like, follow, subscribe, etc. I'm hoping I can keep making cutting edge puzzle boxes bigger better and FREE for a long time!!!!

Check Out The Key &The Launch Puzzle Boxes at my Thingiverse Page!

Like, Subscribe, Follow, Collect, and I'll keep making puzzle boxes!

5/6/2021 10:29PM UPDATE - BarrelPinV2 now posted, resolving 1st layer height issue.
5/7/2021 3:35PM UPDATE - PinClipV2 resolves issue getting "stuck" when barrel is at 45 degrees.
5/26/2021 UPDATE - DoorButtonV2_test has been uploaded for those who need to press the button in and down for the door pins to full unlactch. This also tightens the gold wiggling, and forces the pins lower when DoorButton is pressed. LOOKING FOR FEEDBACK, Is this better for most people?

Print Settings
Artillery Sidewinder X1 V4


Doesn't Matter



Filament brand:

Filament color:
Black, Red Silk, Marble, White, Gold

Filament material:

All Parts can be printed in PLA or PETG

3D printing settings


3D printer file information

  • 3D design format: STL Folder details Close
    • BarrelPin_R.stl
    • BarrelSpring_R.stl
    • Barrel_R.stl
    • Bolt.stl
    • ClipSpring_R.stl
    • Clips_Print_3_of_These.stl
    • Dial.stl
    • DoorButton.stl
    • Gold.stl
    • PinClipV2.stl
    • Pin_1.stl
    • Pins_2_and_3.stl
    • Spacer.stl
    • Tool.stl
    • UpperBoltClamp.stl
    • VaultDoor.stl

    Learn more about the formats

  • Publication date: 2021-12-04 at 01:02
    Published to Thingiverse on: 2021-12-03 at 22:12





Issue with this design? Report a problem

Best sellers of the category Game

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!