Skip to content

The Fidget Stick

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is a model of a fidget stick (if you don't know what a fidget stick isGoogle for it.

The spinner stick is printed as is in one piece. It has a rounded contour, hollow in the center and has extra solid material at both ends, acting as weights.

I printed it with PLA, 0.2mm layer, 70C PEI bed, 200C nozzle, and with material cooling fan on. The important part is to print with very high infill percentage (I used 95%) since this makes the weight at both ends and with no material support.

It's useful to make the ends more grippy. Find a grippy and thin material, glue it to the two flat ends and then cut with scissors or an XActo knife.

The OpenScad source file is included here but the included STL should be just fine..

  • 3D file format: SCAD and STL
  • Publication date: 2020/01/29 at 21:12



Best sellers of the category Game

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!