The Deer Gun (Historical Prop)
- 2.8k views
- 5 likes
- 87 downloads
3D model description
The Deer gun or Dear gun, was a successor to the Liberator pistol developed by the CIA. The single-shot Deer gun was intended for distribution to South Vietnamese guerillas as a weapon against North Vietnamese soldiers invading the South.
The Deer gun was made of cast aluminum, with the receiver formed into a cylinder at the top of the weapon. The striker protruded from the rear of the receiver and was cocked in order to fire, and a plastic clip placed there to prevent an accidental discharge, as the Deer gun had no mechanical safety. The grip was hollow and had space for three 9 mm rounds, as well as a rod for clearing the barrel of spent cases. The Deer gun lacked any marking identifying manufacturer or user, in order to prevent tracing of the weapons, and all were delivered in an unmarked polystyrene box with a series of pictures depicting the operation of the gun, as well as three 9 mm rounds.
The Deer gun was loaded by removing the barrel and placing a 9 mm cartridge in the chamber. The striker was then cocked, and a small plastic clip placed around the striker to impede the forward motion of the striker to prevent accidental discharge. The barrel was then screwed back onto the receiver. The gun was fired by removing the plastic clip, placing it on the barrel where it would become the sight, and pulling the trigger. At this point the user would take the victim's equipment if opportunity presented itself, and then flee. Later, the user would reload the gun by unscrewing the barrel and ejecting the spent case with the provided barrel rod, and following the outlined procedure.
One production run of 1,000 Deer guns were made in 1964 as an initial run, with the final cost projected as $3.95 USD per gun. Unfortunately for the Deer gun, the scenario predicted did not occur. Rather than the Vietnam war being a small clandestine war, it became a full scale war where the Deer gun would not be as useful as foreseen. Some Deer guns were evaluated in Vietnam, but the fate of the rest is unknown. Some sources have stated that all were destroyed, but some have been discovered on occasion.
After printing and testing The Deer Gun & The FP-45 I will list the pros and cons of both designs (This is only my opinion & I never fired any live ammunition through them)
Very easy to design (It took me 2 hours to design this)
Assembly took less than 5 Minutes
Extremely simple design
More Accurate than FP-45 (Rifled Barrel)
There is no Trigger Guard (Safety issues)
Loading takes twice as long as the FP-45
Carries only 3 Rounds of ammunition
Very good design
Reloading is fast
Carries 10 rounds
Can be carried safely with a round in the chamber
Has Iron Sights
Too Complicated (way too many parts)
One of the hardest things I have ever assembled
Tends to pinch your hand once fired (Check the firing video)
All in all they both have their unique things & I love them both ;)
!Don't forget to check out my other Cool designs and Follow my weekly KooKoo uploads, Enjoy ;)
- 3D file format: STL
- Publication date: 2018/09/07 at 12:05
I'm from the UK, I've been printing since Feb 2015, but I also Weld, Wood working, Gunsmith, Customize Motorcycles, Dive Master, Build buggies, Air soft, RC, Electronics, And have over 30 years experience in Tinkering.(love beer and still single lol)
I have the following printers:
Makerbots Mini, Rep plus, 2X & Z18 .
XYZ Printing Da Vinci 1.0.
Original Prusa i3 MK2s
Wanhao Duplicator i3 plus
Flashforge Creator Pro
Homemade double height Z axis prusa I3 with Flexion Extruder
I have been collecting my work shop over the last 15 years and hopefully will be ready at the end of this year, Future interests, Mill and Lathe, Laser Cutter. upcoming projects: FLARE DRONE, ELECTRONIC FLASH GRENADE, SELF AIMING 40 mm Grenade Launcher, FAT-MAN CO2 Launcher, Slingshot Fishing Rod, Slingshot Rifle.
Please Note: These items are "NOT" part of any firearm and can't be changed into a firearm part. They're TOY items, UK LEGAL and VCRA compliant,
!NOTE: I POST AT LEAST ONE DESIGN PER WEEK! Enjoy ;)
If you wish to sell any of my designs please contact me and I'll be more than happy to give you permission, Thanks
Best sellers of the category Game
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!