Hallo, I am from Czech Republic and racing RC Rally 10 years. In 2018 i try print and after complete race season 2018 and 2019 many upgrade i sold kit and this is kit number 2 and ready for season 2021.
The model is radically rebuilt. It is turned front with the rear axle and the belt is on the opposite side. The servo is located in front of the front axle. The battery is located just behind the front axle and there is space for weights next to the battery. The engine is seated behind the rear axle. After removing the engine from the front, it is now possible to tilt the front shock absorbers. Also, understeer has been removed and the model can bend better.
Kit is different balance distribution then before. 49% front - 51% rear, Better control. better stroke. Ready for bigger turning then before. Faster service and better battery change.
Please be careful for scale in stl. sometimes you make scale for 10000%.
PLA i recommend 80-90% full is OK. PET-G is also good.
Printed on Prusa i3 MK3
To right side put battery and left insert 130 g wheel weights.
When you need halp please write on facebook.
Page our team and photo rc rally models https://www.facebook.com/horne...
PLA 0.2 mm 80-90%
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!