Small playmobil studio with a bedroom on the first floor with an uncovered terrace to access the first floor you have a staircase outside the house.
On the ground floor you have a room with kitchen and living room as well as a small covered terrace with pretty small exposed beams and a small staircase.
ideal studio for a couple or single person, pets accepted...
the upper chamber is 15 cm long and 9 cm wide and 10 cm deep, printing time 13 h 11 min
the living-room/kitchen measures 22 cm long by 3.4 cm wide and 9 cm high printing time 20 h
a barrier measures 6.2 cm long by 3.1 cm wide and 4 mm deep, printing time 17 min
the staircase measures 9.7 cm long by 11 cm wide and 9.8 cm deep, printing time 3 h 47 min
small staircase measures 6.6 cm long by 5.3 cm wide and 1.3 cm deep, printing time 1 h 07 min
a small staircase barrier measures 4.9 cm long by 3.1 cm wide and 5 mm deep, printing time 32 min
small window that fits into the chamber measures 5.1 cm long by 1.3 cm wide and 6 mm deep, printing time 32 min for 2 windows
small window that fits into the living room measures 5.3 cm long by 2 cm wide and 9 mm deep, printing time 46 min 2 windows
large window that fits into the living room measures 9.4 cm long by 1.4 cm wide and 4.2 mm deep, printing time 20 min
the beams that fit into the small terrace measure 10.9 cm long by 3.7 cm wide and 5.9 mm deep, printing time 53 min for the 3 beams
the small terrace measures 10.2 cm long by 5.3 cm wide and 1.3 cm deep, printing time 1 h 58 min
3D PRINTING PARAMETERS
20% filling rate
80% printing speed
215 ° PLA printing temperature
60 ° plateau temperature
0.2 layer thickness
1.2 hull thickness
1.2 thickness above/below
VERY LITTLE SUPPORT
je modélise depuis janvier 2017, c'est devenu ma passion...
la créativité c'est l'art d'accomplir ces rêves
ma page facebook : https://www.facebook.com/catf3d/?modal=admin_todo_tour
instagram : https://www.instagram.com/catf3d/
twitter : https://twitter.com/catf3D
tumblr : https://catf3d.tumblr.com/
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!