I told you that I continued to work to improve my model of spinner, it is done with my first functional model, and it goes beyond my expectation, still lack a little power but it will take you the head when You will start to spin this stuff! I made a modification to the outer diameter of the model, so it is smaller. Now the thickness is 6 mm against 5 mm on the proto this brings better resistance to the spiral spring. I used a system of ball brake (and it is damn effective), 2 in total of a diameter between 1,8mm and 2 mm recovered in a ball bearing cut to the dremell. The balls must move freely in their seats. And the setting is done with a small adjust as shown in the picture. I already have my next model in the head, go hop! I'm back!
Always on orange PLA (promised the next version will be in blue!).
I advise a layer height of 0.2 mm
the central bearing always makes 16 mm outside and 8mm inside
the 3 satellites make 15 mm
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!