This is a desktop display for Emmett's screwless cube gears.
The original cube display that this is based on requires supports to print properly. I redesigned the model to print flat on the bed, and give you an optional top surface.
You can use the test print to make the parts that press fit together if you want to test your printer settings before making the full version.
Print the model which includes the base and holder arm. Choose which finish you want on the base:
Flat from the printing surface -or-
The somewhat honeycombed or dimpled top surface, depending entirely on your infill and top layer settings.
The base in the photos is plate side up, so the honeycombed surface is down toward the table.
Press the arm into the hole, checking with your printed cube until the fit is snug, but not too tight.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!