Roads to perdition - a sinister cities kickstarter campaign - free samples

This is a free sample for our upcoming second Kickstarter campaign:

"Sinister Cities - roads to perdition"
A vase mode printable battlefield floor tile set

To support us , visit our Kickstarter campaign page for further information:

https://www.kickstarter.com/projects/2011770908/sinister-cities-presents-roads-to-perdition

This sample includes two different 6 inch x 6 inch floor tiles , an optional special openLock compatible subframe and an openLock clip

Also included is the vase mode printable bunker with matching , updated 6x6 floor tile and roof.( bunker stl files can be found in the .zip file)

The floortiles and the bunker parts are designed to be printed in vase mode (spiralize contour) on your fdm printer.

The subframe and clip is designed to be printed in normal mode.

All our models are designed and testprinted to be printed with a 0.8mm nozzle and a layer hight of 0.12 mm or less.

The subframe and clips can be printetd in normal mode also with the 0.8mm nozzle at 0.2 layers.

Our vase mode cura profile (ender5) is also included in the download

The floor tile models and bunker parts should print without supports flat on the buildplate with an SLA/resin printer too, if you want to give it a try

Subframe system is equipped with the OpenLOCK system from:

www.printablescenery.com

for the floor tiles:
set vase mode / spiralzed contour
0,8 mm nozzle / 0.8 mm line width
0,12 mm layer hight
good quality pla or pla+ recommended
cura profile in download included

for the frame and clip :
regular printing mode with supports ( we used 15% zigzag, no roof/floor)
0.8 mm nozzle /0.8mm line width
0.2 mm layer hight