RC Tiger Moth Cowl

Nose/ Cowl for Tiger Moth RC plane. This is scaled for a 1m wingspan model. If you have an airplane of a different size, scale this model according to your needs.

This is an assembly video of the model plane with the original cowl.
https://www.youtube.com/watch?v=Hcwf_bLUbgk

The original transparent PET one is nice, but this new design features the followings:
- Room for larger brushless motor
- Better crash resistance and more elasticity on impact
- Better motor ventilation
- Better aerodynamics
- Possibility of adding front mass by thickening the walls for balance

These solid models can be either printed as spiral vase or as solids with 0% infill.

For the spiral vase print:
- 1mm layer height
- 3 bottom layers

For the solid print:
- 2 perimeters
- 1mm layer height
- 8 bottom layers
- 10 top layers
- 0% infill

After printing:
Trim the flat base using a cutter, dremel or soldering iron
For the hole model trim the inner tube 3mm under the top edge
For the model with no hole, cut a hole into the top layer of about 20mm in diameter