Rat Rogue! He's ready to plunder the nearest dungeon of loot, sack at the ready to haul it back in! Perfect for paper and pencil homebrew races like Ratfolk, Ratkin, etcetera.
Scaled to be roughly in line with 28mm, will comfortably fit on a standard medium size base, and with a little shuffling and scaling would fit on a small base if you can print very fine details!
I've provided both baseless and based versions for however you desire to print, but be warned that the base is barebones; maybe find a nice dungeon tile base for him!
Printed with flat-footed with a 0.4mm nozzle, at 0.4mm width walls, and 0.12mm layer heights. For finest detail, I'd recommend thinner layer heights and using something smaller, like 0.2 through 0.3mm nozzle, or SLA printing, if possible. Auto-generated S3D supports, with one added underneath the pommel of the dagger.
Simplify 3D users may want to increase the Horizontal Size Compensation by +0.10 or more to help with fine details.
If you have a hard time getting the feet to print without the base, don't worry, so did I!
I had good luck lowering the z-axis in my slicer by about -0.01 or -0.02 mm in order to get a little bit more surface area, as well as using a skirt/brim that -just touches- the edges of the parts on the first layer.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!