Skip to content


Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

  • 2 collections

Licence CULTS - Private Use
Publication date 2023-11-17 at 13:24
Design number 1584025
3D design format
STL Folder details Close
  • body.stl
  • body_front.stl
  • fixed_feet.stl
  • hinge.stl
  • rotated_feet.stl

Learn more about the formats

3D printer file info

3D model description

ramp walker can automatically goes down the ramp. Using the principle of weight transfer, you can achieve an amazing walking posture without relying on any energy power.

1. Feet increase friction with default print direction.
2. 100% filled printing is required to ensure the location of the center of gravity.
3. If the feet appear elephants foot after printing, we need to be smoothed with a utility knife.
4. The slope angle is about 10 degrees.
5. When dispensing glue together, be careful not to stick the rotating foot.
6. If you cannot walk in a straight line, you need to make sure the soles of your feet are flat.
7. If the hinge cannot be installed, there may be burrs around the hole. The edges of the holes must be scraped clean


1. 腳用預設的列印方向增加摩擦力
2. 需要實心列印來確保重心的位置
3. 腳在列印後出現象腳,需要用美工刀修平
4. 斜坡角度約10度
5. 組裝點膠注意不要黏住會旋轉的那隻腳
6. 若不能走直線需要確認腳底是平坦的
7. 若軸裝不進去,可能為孔有毛邊,須將孔的邊緣刮清

3D printing settings

Having a solid first layer is absolutely crucial for a successful 3D print.
It's essential to ensure that your 3D printer is well-calibrated, and you've achieved proper bed adhesion.
Additionally, it's highly advisable to have effective layer cooling in place as it helps prevent issues like curling and warping, especially when dealing with overhangs.
確保您的 3D 打印機有經過良好校正並獲得適當的熱床黏附力。

With support
Layer height = 0.1 or 0.2
Wall line count = 3 perimeters (to make the links strong)
Filling = 100% appropriate
Recommended speed = 40-60 mm/s
Horizontal expansion = 0
Material PLA, ABS


Issue with this design? Report a problem.


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

100% secure payment with PayPal or Credit Card.