Simple racing quad frame with minimal components to print.
You will need to print
- 4 arms
- 6 risers (two types which you may chose, 50mm is the higher version for extra clearance)
- 1 lower plate
- 1 top plate
I would suggest using machine screws as a method of fitting the arms to the lower plate and then using nyloc nuts.
The top plate has been designed to accommodate a kk2.1 flight board, there is 2mm stand-offs already included in the print. The lower plate has stand-offs for a standard power distribution board.
The maximum motor diameter is 24mm, the arms where designed to take 250 size motors.
This build should fit onto a 200mm x 200mm build plate. The largest pieces are the plates which measure 60mm x 200mm x 4mm
I have updated the arm design, after a few trials with my previous design I am not happy with how much they flex and also lack some form of ground clearance. I have rectified the design, landing legs have been added and also added a beading below to reduce the flex when under load. 'File name - armv2.stl'
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!